Home > Gas Sensor >

Solid Polymer Electrolyte Based Gas Sensor Amphenol PS4-CO-1000 for Accurate Carbon Monoxide Detection

Product Categories

Analog and Digital Output [295]
Sensor, Transducer Amplifiers [7]
Specialized Sensors [33]
Thermostats - Solid State [7]
Float, Level Sensors [42]
Accelerometers [156]
Force Sensors, Load Cells [6]
Humidity, Moisture Sensors [120]
Particle, Dust Sensors [9]
Photoresistors [39]
Sensor, Transducer Accessories [5]
Angle, Linear Position Measuring [417]
Ultrasonic Receivers, Transmitters [44]
NTC Thermistors [809]
Current Sensors [469]
Pressure Sensors, Transducers [381]
Ambient Light, IR, UV Sensors [139]
Proximity Sensors [56]
Encoders [6]
Strain Gauges [5]
Multifunction [55]
Flow Switch [12]
Pressure Transmitters [1]
Gas Sensor [304]
PTC Thermistors [44]
Particulate Matter (PM) Transmitters [13]
IrDA Transceiver Modules [6]
Distance Measuring [11]
Photo Detectors - Remote Receiver [60]
Sensor Cable Accessories [1]
Linear, Compass (ICs) [289]
Position, Proximity, Speed (Modules) [72]
Multi Purpose Magnets [2]
Optical Motion Sensors [70]
Thermostats - Mechanical [48]
Gyroscopes [5]
Camera Modules [8]
IMUs (Inertial Measurement Units) [18]
Photo Detectors - Logic Output [4]
Switches (Solid State) [703]
Photointerrupters - Slot Type - Logic Output [26]
Photodiodes [103]
Image Sensors, Camera [18]
Inclinometers (ICs) [6]
Vibration Sensors [77]
RTD (Resistance Temperature Detector) [83]
Photointerrupters - Slot Type - Transistor Output [71]
Phototransistors [67]
Reflective - Analog Output [67]
Reflective - Logic Output [14]
Thermocouples, Temperature Probes [32]

Changsha Purple Horn E-Commerce Co., Ltd.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

Solid Polymer Electrolyte Based Gas Sensor Amphenol PS4-CO-1000 for Accurate Carbon Monoxide Detection

Measurement Range : 1.2bar~800mbar

Operating Temperature : -40℃~+55℃

Description : 1.2bar~800mbar Gas Sensor RoHS

Mfr. Part # : PS4-CO-1000

Model Number : PS4-CO-1000

Contact Now

Product Overview

The SGX series of PS1 and PS4 Solid Polymer Electrolyte gas sensors leverage a revolutionary technology based on catalytic reaction principles to measure target gases. These sensors generate a small current proportional to gas concentration, offering a stable, high-quality, and cost-effective manufacturing process. Key advantages include a very small size, high sensitivity, no power consumption, and very low cross-sensitivity. They are designed for applications such as TLV Monitoring, the Oil & Petrochemical Industry, Leak Detection, the Steel Industry, and Parking Garages.

Product Attributes

Brand: SGX
Technology: Solid Polymer Electrolyte
Housing Material: PPO
Origin: Poland (SGX Europe Sp. z o.o.)
Warranty: 12 months

Technical Specifications

Specification	PS1-CO-1000	PS4-CO-1000
Model	PS1-CO-1000	PS4-CO-1000
Target Gas	Carbon Monoxide (CO)
Sensitivity	25 ± 10 nA / ppm
Measurement Range	0 1000 ppm
Zero Current	± 100 nA
Maximum Overload	2000 ppm
Response Time (T50)	< 10s
Response Time (T90)	< 30s
Repeatability	< 1%
Lower Detectable Limit (LDL)	≤ 2 ppm
Linear Range	1000 ppm
Resolution (16Bit ADC)	0.1ppm
Operating Humidity Range	15-95% RH
Pressure Range	800 to 1200 hPa
Storage Temperature	0 to 20°C
Temperature Range	-40°C to +55°C
Operating Principle	Amperometric
Recommended Load Resistor	100 Ω
Bias Voltage	0 mV
Warm Up Time	< 60 s
Long-Term Drift	< 1 %/month
Zero Drift in Clean Air	< 2 ppm
Storage Life	12 months
Expected Lifetime	> 5 years in air
Weight	< 0.7g	< 6g

Features

Small size
Wide temperature range
Low cross sensitivity
No electrolyte leakage
High sensitivity
Fast response time
Extreme linear response up to high concentration

Important Notes

All performance is based on conditions at 20°C, 50% RH and 1 atm, flow rate>150qcm/min, using SGX recommended circuitry.
Sensor performance is temperature dependent; contact SGX for performance outside of 20°C.
Do not solder to the connector pins as this may damage the sensor and invalidate the warranty.
Details on recommended connector pins can be found in the FAQ section of the SGX website.
Exposure to high concentrations of solvent vapours should be avoided during storage, fitting, and operation.
When using sensors on PCBs, degreasing agents should be used prior to sensor fitting.
For life safety performance requirements, it is recommended that all sensors and instruments are checked for response to gas before use.

Cross Sensitivity

Gas	Formula	Test Concentration	Sensor Reading
Alcohols	R-OH	1000ppm	0ppm
Ammonia	NH3	50ppm	0ppm
Carbon Dioxide	CO2	1000ppm	1ppm
Chlorine	CL2	0ppm	0ppm
Ethylene	C2H4	10ppm	0ppm
Hydrogen Cyanide	HCN	50ppm	0ppm
Hydrogen	H2	100ppm	20ppm
Hydrogen Sulphide	H2S	50ppm	0ppm
Isopropanol	C3H7OH	1000ppm	0ppm
Methanal	CH4	1%vol	n.e
Nitric Oxide	NO	25ppm	0ppm
Nitrogen Dioxide	NO2	10ppm	0ppm
Sulphur Dioxide	SO2	10ppm	0ppm

Note: Interference factors may vary. This table is not exhaustive; contact SGX for other gases.

2411272324_Amphenol-PS4-CO-1000_C6629221.pdf

Cheap Solid Polymer Electrolyte Based Gas Sensor Amphenol PS4-CO-1000 for Accurate Carbon Monoxide Detection for sale

Solid Polymer Electrolyte Based Gas Sensor Amphenol PS4-CO-1000 for Accurate Carbon Monoxide Detection Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Changsha Purple Horn E-Commerce Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!