| Model Series | PC420A-DA |
| Output, 4-20 mA Full Scale | 20 mA, 5% |
| Frequency Response (4-20 mA) | 10% 3 dB: 10 Hz - 1.0 kHz; 4.0 Hz - 2.0 kHz |
| Repeatability (4-20 mA) | 2% |
| Transverse Sensitivity (max) | 5% |
| Dynamic Output Sensitivity | 100 mV/g, 10% |
| Dynamic Output Full Scale | 20 g |
| Dynamic Output Frequency Response | 3 dB: 2.5 Hz - 10 kHz |
| Amplitude Nonlinearity (max) | 1% |
| Resonant Frequency (mounted, nominal) | 25 kHz |
| Power Requirements (2-wire loop power) | Voltage at sensor terminals: 12 - 30 VDC |
| Loop Resistance (at 24 VDC, max) | 700 |
| Turn-on Time (4-20 mA loop) | < 30 sec |
| Dynamic Output Bias Voltage | +3.3 VDC, re: connector pin B |
| Dynamic Output Noise (equiv. g, 2.5 Hz - 10 kHz) | 2 mg |
| Grounding | Case isolated, internally shielded |
| Temperature Range | 40 to +85C |
| Vibration Limit | 250 g peak |
| Shock Limit | 2,500 g peak |
| Weight | 162 grams |
| Mounting | 1/4-28 tapped hole |
| Output Connector | 3 pin, MIL-C-5015 style |
| Mating Connector | R6G type |
| Recommended Cabling | J9T3A (3-conductor shielded, yellow Teflon jacket) |
| Connections | Function: loop positive (+)
Connector pin: A
Function: loop negative (), dynamic common
Connector pin: B
Function: dynamic output
Connector pin: C
Function: ground shell |
| Model Selection Guide: PC420Ax-yy-DA | x (4-20 mA output type): R = RMS output, P = calculated peak output, TP = true peak output
yy (4-20 mA full scale): 05 = 5 g, 10 = 10 g, 20 = 20 g
DA: acceleration, 100 mV/g |
| Loop Resistance Calculation | RL = (DC supply voltage 10 V) / 20 mA |
| Minimum RL Wattage Capability | Calculated by: (0.0004 x RL) |
| Accessories Supplied | SF6 mounting stud; calibration data (level 2) |
